SFP-GSS-MPO250-SRT
The LYCOM Technologies GSS-MP0250-SRT is a single-Channel, Pluggable, Fiber-Optic SFP28 for 24.33 Gigabit 5G eCPRI SFP28 SR（Industrial Grade）Applications. It is a high performance module for short-range data communication and interconnect applications which operate at 24.33 Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. This module is designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 20 contact edge type connector. The optical interface uses duplex LC receptacle. This module incorporates LYCOM Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
SFP-GSS-MPO250-SRT
Hot-pluggable SFP28 form factor
Supports 24.33Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the I2C interface
RoHS compliant
Case temperature range: -40°C to 85°C
Pin Descriptions
| PIN |
Logic |
Symbol |
Name / Description |
Note |
| 1 |
|
VeeT |
Module Transmitter Ground |
1 |
| 2 |
LVTTL-O |
TX_Fault |
Module Transmitter Fault |
2 |
| 3 |
LVTTL-I |
TX_Dis |
Transmitter Disable; Turns off transmitter laser output |
|
| 4 |
LVTTL-I/O |
SDA |
2-Wire Serial Interface Data Line |
2 |
| 5 |
LVTTL-I |
SCL |
2-Wire Serial Interface Clock |
2 |
| 6 |
|
MOD_ABS |
Module Definition, Grounded in the module |
|
| 7 |
LVTTL-I |
RS0 |
Receiver Rate Select |
|
| 8 |
LVTTL-O |
RX_LOS |
Receiver Loss of Signal Indication Active LOW |
|
| 9 |
LVTTL-I |
RS1 |
Transmitter Rate Select (not used) |
|
| 10 |
|
VeeR |
Module Receiver Ground |
1 |
| 11 |
|
VeeR |
Module Receiver Ground |
1 |
| 12 |
CML-O |
RD- |
Receiver Inverted Data Output |
|
| 13 |
CML-O |
RD+ |
Receiver Data Output |
|
| 14 |
|
VeeR |
Module Receiver Ground |
1 |
| 15 |
|
VccR |
Module Receiver 3.3 V Supply |
|
| 16 |
|
VccT |
Module Receiver 3.3 V Supply |
|
| 17 |
|
VeeT |
Module Transmitter Ground |
1 |
| 18 |
CML-I |
TD+ |
Transmitter Non-Inverted Data Input |
|
| 19 |
CML-I |
TD- |
Transmitter Inverted Data Input |
|
| 20 |
|
VeeT |
Module Transmitter Ground |
1 |
Notes:
1. Module ground pins GND are isolated from the module case.
2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board
Ordering Information:
| Part Number |
Product Description |
| SFP-GSS-MPO250-SRT |
SFP28 SR（Industrial grade）, 24.33Gb/s, 850nm, 100m, MMF, LC |
